User Manual

49Rack ATS AP44xx User Manual
snmpv3
Access: Super User, Administrator
Description: View the existing SNMPv3 settings, enable or disable SNMPv3 and configure basic SNMP
parameters. Configure up to 4 SNMPv3 user profiles.
NOTE: SNMPv3 is disabled by default. A valid user profile must be enabled with passphrases (-a[n], -
c[n]) set before SNMPv3 communications can be established.
Parameters
Example:
apc> snmpv3
E000: Success
SNMPv3 Configuration
SNMPV3: disabled
SNMPv3 User Profiles
Index: 1
User Name: apc snmp profile1
Authentication: None
Encryption: None
Index: 2
User Name: apc snmp profile2
Authentication: None
Encryption: None
SNMPv3 Access Control
Index: 1
User Name: apc snmp profile1
Access: disabled
NMS IP/Host Name: 0.0.0.0
Index: 2
User Name: apc snmp profile2
Access: disabled
Option Argument Description
-S <enable | disable> Enable or disable SNMPv3.
-u[n] <User Name> Set the User Name for access control.
-c[n] <Crypt Phrase> Set the encryption phrase of User profile.
-a[n] <Auth Phrase> Set the authentication phrase of User profile.
-n[n] <IP or Domain Name> Set the host’s name or address for access control.
-ap[n] <sha | md5 | none> Set the authentication protocol for access control.
-pp[n] <aes | des | none> Set the privacy protocol for access control.
-ac[n] <enable | disable> Enable or disable access for this user profile.
-au[n] <User profile name>] Access User Profile
[n] = Access Control # (1, 2, 3, or 4)