User Manual

51Rack ATS AP44xx User Manual
system
Access: Super User, Administrator
Description: View and set the system name, the contact, the location and view up time as well as the
date and time, the logged-on user, and the high-level system status P, N, A (see “About the Main Screen”
on page 18 for more information about system status).
Parameters:
Example 1:
apc> system
E000: Success
Host Name Sync: Disabled
Name: apcB76B83
Contact: Unknown
Location: Unknown
Message:
DateTime: 11/02/2019:09:06:45
User: apc
Up Time: 5 Days 2 Hours 35 Minutes
Stat: P+ N4+ N6+ A+
Bootmon: bootmon:v1.0.8
AOS: aos:v6.6.4
App: ats4g:v6.6.4
Error Message: E000, E102
Optio
n Argument Description
-n <system-name> Define the device name, the name of the person responsible for the
device, and the physical location of the device. These values are also
used by StruxureWare Data Center Expert, EcoStruxure IT, and the
Rack ATS’s SNMP agent.
NOTE: If you define a value with more than one word, you must
enclose the value in quotation marks.
-c <system-contact>
-l <system-location>
-m <system-message>
When defined, a custom message will appear on the log on screen for
all users.
-s <enable | disable>] Allow the host name to be synchronized with the system name so both
fields automatically contain the same value.
NOTE: When enabling this feature, the system name identifier can no
longer contain a space character (since it will be synchronized to the
host name field).