User Manual

Rack ATS AP44xx User Manual52
tcpip
Access: Super User, Administrator
Description: View and manually configure these network settings for the Rack ATS.
Parameters:
Example 1: To view the network settings of the Rack ATS, type tcpip and press
ENTER.
apc> tcpip
E000: Success
Active IPv4 Settings
--------------------
Active IPv4 Address: 192.168.1.50
Active IPv4 Subnet Mask: 255.255.255.0
Active IPv4 Gateway: 192.168.1.1
Manually Configured IPv4 Settings
---------------------------------
IPv4: enabled
Manual Settings: disabled
IPv4 Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway: 0.0.0.0
Mac Address: 00 c0 B7 F4 39 D5
Domain Name: example.com
Host Name: HostName
Example 2: To manually configure an IP address of 150.250.6.10 for the Rack ATS, type:
apc> tcpip -i 150.250.6.10
E000: Success
Error Messages: E000, E102
Option Argument Description
-i <IPv4 address> Enter the IPv4 address of the Rack ATS, using the format
xxx.xxx.xxx.xxx
-s <subnet mask> Enter the subnet mask for the Rack ATS.
-g <gateway> Enter the IP address of the default gateway. Do not use the loopback
address (127.0.0.1) as the default gateway.
-d <domain name> Enter the DNS name configured by the DNS server.
-h <host name> Enter the host name that the Rack ATS will use.
-S <enable | disable> Enable or disable IPv4.