User Manual

53Rack ATS AP44xx User Manual
tcpip6
Access: Super User, Administrator
Description: Enable IPv6 and view and manually configure network settings for the Rack ATS.
Parameters:
Example: To view the network settings of the Rack ATS, type tcpip6 and press
ENTER.
apc> tcpip6
E000: Success
IPv6: enabled
Manual Settings: disabled
IPv6 Address: ::/64
MAC Address: XX XX XX XX XX XX
Gateway: ::
IPv6 Manual Address: disabled
IPv6 Autoconfiguration: enabled
DHCPv6 Mode: router controlled
Error Message: E000, E102
Option Argument Description
-S <enable | disable> Enable or disable IPv6.
-man <enable | disable> Enable or disable manual addressing for the IPv6 address.
-auto <enable | disable> Enable or disable automatic configuration for the IPv6 address.
-i <IPv6 address> Set the IPv6 address of the Rack ATS.
-g <IPv6 gateway> Set the IPv6 address of the default gateway.
-d6 <router | stateful
| stateless |
never>
Set the DHCPv6 mode:
•
router: DHCPv6 is controlled by the flags received in IPv6 router
advertisements.
•
statefull: DHCPv6 is used to obtain addresses AND other
configuration settings.
•
stateless: DHCPv6 is used to configure settings other than
addresses.
•
never: Disable DHCP.