User Manual

Rack ATS AP44xx User Manual58
Device Command Descriptions
The device command descriptions include the ATS command’s units, resolution/scale, and ranges.
aboutATS
Access: Super User, Administrator, Device User, Read Only User
Description: Display ATS controller information.
Parameters: None
Example:
apc> aboutATS
E000: Success
Model: AP4450
Firmware Rev: 6.8.0
Firmware Date: 08/03/19
Hardware Rev: R01
Manufacture Date: 03/29/19
Serial Number: 5AXXXXXXXXX
Downloader Rev: 4.0
Error Messages: E000, E102
atsStatus
Access: Super User, Administrator, Device User, Read Only User
Description: Read ATS status information.
Parameters: None
Example:
apc> atsStatus
E000: Success
Communication Status: OK
Selected Source: Source B
Preferred Source: Source B
Switch Status: OK
Front Panel: Unlocked
Source A: OK
Source B: Selected
Phase Synchronization: Sync
Source A 24V Power Supply: OK
Source B 24V Power Supply: OK
Source A 24V Boost Voltage: OK
Source B 24V Boost Voltage: OK
3.3V Power Supply: OK
1.0V Power Supply: OK
Error Messages: E000, E102