User Manual
Rack ATS AP44xx User Manual82
Reset the Network Interface
Path: Control > Network > Reset/Reboot
This menu gives you the option to reset and reboot various components of the network interface.
NOTE: Rebooting only restarts the Rack ATS’s Network Management Interface; it does not affect the
ON/Off status of the ATS.
Reset All: Clear the Exclude TCP/IP check box to reset all configured values, including settings that
determine how this device obtains TCP/IP and the EAPoL configuration values. The default for TCP/IP
configuration setting is DHCP and that for EAPoL access is disabled. Select the Exclude TCP/IP check
box to reset all configuration values except for settings that determine how this device obtains TCP/IP
and the EAPoL configuration values.
Reset Only: Resetting may take up to a minute. Options include
• TCP/IP settings: Resets only the setting that determines how this device must obtain its TCP/IP
configuration values including the EAPoL configuration. The default for TCP/IP configuration
setting is DHCP and that for EAPoL access is disabled.
• Event Configuration: Resets events to their default configuration. Any specially configured event
or group will also revert to the default value.