User manual

User Manual Rack LCD Console8
4. Slide the rear attachment sliding
brackets along the slide bars until they
contact the rear of the Rack LCD
Console. Use the supplied M4 x 6
screws to attach the bars to the rear
of the Rack LCD Console
switch. Fully tighten these screws.
5. Slide the Rack LCD Console open and
closed two or three times to be sure it
is operating smoothly.
6. If the Rack LCD Console is moving
properly in the brackets, fully tighten
the screws inserted in step 3.
Rack LCD Console Installation
Cable installation
Connect the target device (KVM switch or server) to the custom communication port on the back
of the Rack LCD Console using one of the two custom communication cables (PS2 or USB) that
are included. Plug the keyboard, monitor, and mouse connectors to the ports on the target device
(KVM switch or server).
Note: The maximum distance between the Rack LCD Console and the target device (a KVM
switch or server) is 32.8 feet (10m).
Power On the Rack LCD Console
1. Plug the power cord into the power socket on the Rack LCD Console and into an AC
power outlet.
2. Turn the Rack LCD Console on. See “Power Switch” on page 6 for the location of the
On/Off toggle switch at the back of the Rack LCD Console.
aem0348a