User manual

9User Manual Rack LCD Console
Operation
Basic Functions
Opening the Rack LCD Console
To access the console, slide the Rack LCD Console out of the rack and raise the cover.
Closing the Rack LCD Console
Close the cover and slide the Rack LCD Console into the rack.
Powering off and restarting
Turn off the power to the Rack LCD using the rear panel power switch. See “Power Switch” on
page 6 for the location of the On/Off switch.
To restart the Rack LCD turn the rear panel power switch back on.
Standby mode
The Rack LCD will go into Standby mode to save energy when the cover is closed. The display
will turn OFF when the cover reaches approximately 15 degrees from completely closed. Power
will remain ON but the monitor display will be OFF.
Hot plugging
Components can be removed and added to the Rack LCD Console by unplugging their cables
from the ports without the need to shut down the console.
CAUTION
HAZARDS RESULTING FROM MISUSE
• Never lean on the device.
• Slide rail mounted equipment is not to be used as a shelf or a work space. Do not set objects
on the device.
Failure to follow these instructions can result in injury or equipment damage.