Owner's manual

How to Install the PDU

10 Rack Power Distribution Unit

2. Choose a location for the PDU.

a. Insert a caged nut (provided with the enclosure) above and

below a notched hole on each vertical mounting rail in your

chosen location.

b. Align the mounting holes of the brackets with the installed

caged nuts. Insert and tighten the screws.

Connect to an APC UPS

1. Route the power cord through one of the slots on the roof of the

enclosure.

2. If necessary, route the PDU cord across a ladder connected to the

enclosure to connect to an APC UPS.

3. Plug the PDU into the L14 outlet on the rear of the UPS.

Note

The PDU occupies two U-spaces. The numbers on the

enclosure’s vertical rail denote the middle of a U-space.