Owner's manual

4 Rack Power Distribution Unit
How to Shorten the Power Cord
Plug layout
Remove the plug
1. Loosen, but do not remove, the four captive screws from the plug
face until it is detatched from the plug.
2. Loosen, but do not remove, the four screws from the sides of the
plug until the cord easily slides in and out.
3. Slide the plug case down the cord to your desired length.
4. Loosen, but do not remove, all four terminal screws until you can
remove all four wires from the plug. Set the plug face aside for
later use.
Warn
i
ng
Only certified electricians can perform the following
procedure.
 Cord sleeve
 Strain relief
 Plug case
 Plug face




Note
The cord must remain at least 4.9 feet (58.8 inches) long.