Owner's manual
Table Of Contents
Rack Power Distribution Unit 9
How to Install the PDU
Mounting options
Install the PDU in the bottom 2U of a NetShelter
®
or any standard
19-inch EIA-310-D rack or enclosure, using the mounting brackets
(provided).
Bracket-mounting
1. Attach the mounting brackets to the PDU, using four flat-head
screws per bracket (provided).
- To mount the PDU with the outlets facing out of the rack:
- To mount the PDU with the outlets facing the top of the rack:
Note
The PDU can be installed in one of two ways, with the outlets
facing out of the rack or toward the roof of the rack.
Note
The PDU is intended only for use with an APC UPS. Do not
plug it into an electrical outlet or another device.