Datasheet

1 of 2

Automatic Transfer Switch

Overview

The APC

Automatic Transfer Switch (ATS) is a high-availability switch that provides redundant power

to rack-mount equipment. The Automatic Transfer Switch supplies power from a primary input line; if that

line becomes unavailable for any reason, the switch automatically begins supplying power from a

secondary line.

Rear view—AP7722

No. Item Description/Function



Output Power Cord

The IEC 309 outlet cord connects the switch to a Rack-

mount PDU, providing a redundant source of power to the

PDU and the equipment connected to it.



Input Power Cord

The two IEC 309 plug cords connect the switch to two

separate power sources (A,B). The switch is set to draw

power from the preferred source and automatically switch

over to the secondary source, when necessary.





PAGE 1
Automatic Transfer Switch Overview The APC® Automatic Transfer Switch (ATS) is a high-availability switch that provides redundant power to rack-mount equipment. The Automatic Transfer Switch supplies power from a primary input line; if that line becomes unavailable for any reason, the switch automatically begins supplying power from a secondary line. Rear view—AP7722 No.
PAGE 2
Specifications AP7722 Electrical Nominal input voltage 230VAC Acceptable input voltage 220–240VAC Nominal input frequency 50/60Hz Input connectors Two 36-inch, attached IEC 309 line cords Output connectors One 36-inch, attached IEC 309 line cord Maximum total current draw 16A Physical Size (h × w × d) 1.71×17.00×9.00in (4.34×43.18×22.86cm) Weight 8.6lb (3.9kg) Shipping Weight 14.1lb (6.