Technical information

Chapter 4:
Integrated Environmental Monitor (iem) OIDs (AP9618 or AP9619 Network Management Card Only)
PowerNet MIB Reference Guide
32
Integrated Environmental Monitor (iem) OIDs
(AP9618 or AP9619 Network Management Card
Only)
Three categories of iem OIDs provide for managing the Integrated Environmental Monitor at an
AP9618 or AP9619 Network Management Card.
• [iemIdent] OID
• [iemConfig] OIDs
• [iemStatus] OIDs
Note:
The Integrated Environmental Monitor has one probe, two input contacts, and an
output relay available.
To access these iem OIDs in the PowerNet MIB, do the following:
1. Select [products] under [apc].
2. Select [hardware].
3. Select [environmentalMonitor].
4. Select [integrated].
[iemIdent] OID
A single [iemIdent] OID, iemIdentHardwareRevision, identifes the hardware version for the
Integrated Environmental Monitor.
[iemConfig] OIDs
Two sets of [iemConfig] OIDs are available to configure an Integrated Environmental Monitor:
• [emConfigProbes] OIDs
• [emConfigContacts] OIDs