Technical information

Chapter 6:
[sPDUMasterControlVM] Master Control OIDs
PowerNet MIB Reference Guide
45
[sPDUMasterControlVM] Master Control OIDs
The [sPDUMasterControlVM] category has a read-only OID and a tabled set of OIDS that provide information on the
MasterSwitch VM unit and commands to control it.
[sPDUMasterConfigVM] Master Configuration OIDs
The [sPDUMasterConfigVM] category has a read-only OID and a tabled set of OIDs that provide commands to
configure the MasterSwitch VM unit.
OID Task
sPDUMasterControlVMTableSize
The number of MasterSwitch VM units.
{sPDUMasterControlVMTable}
{sPDUMasterControlVMEntry}
sPDUMasterControlVMIndex
sPDUMasterControlVMName
sPDUMasterControlVMCommand
View and control a specified MasterSwitch VM unit.
• The index to the MasterSwitch VM unit
’s entry (read-only).
• The name for the MasterSwitch VM unit (read-only). (You use the
sPDUMasterConfigVMName OID to define this name.)
• Affect the current outlet state.
- noCommandAllVM (1): The value returned by an SNMP GET of this
OID.
- immediateAllOnVM (2): Turn on all outlets immediately.
- immediateAllOffVM (3): Turn off all outlets immediately.
- immediateAllRebootVM (4): Reboot all outlets immediately.
- delayedAllOnVM (5): Turn on all outlets as defined by the value of the
sPDUOutletConfigVMPowerOnTime OID for each outlet.
- delayedAllOffVM (6): Turn off all outlets as defined by the value of the
sPDUOutletConfigVMPowerOffTime OID for each outlet.
- sequencedAllRebootVM (7): Perform the command
immediateAllOffVM, wait the time specified for the
sPDUMasterStatusVMRebootDuration OID, then perform the
command delayedAllOnVM.
- delayedAllRebootVM (8): Perform the command immediateAllOffVM,
then cause each outlet to wait the time specified by its
sPDUOutletConfigVMRebootDuration OID before it provides power.
- delayedSequenceAllRebootVM (9): Perform the command
delayedAllOffVM; when all outlets are off, wait the time specified by the
sPDUMasterStatusVMRebootDuration OID, then perform the
command delayedAllOnVM.
- cancelAllPendingCommandsVM (10): Cancel all pending commands
on the MasterSwitch VM unit.
- audioAlarmMute (11): Disable the audible alarm for the duration of the
current overload condition. The alarm will be activated for subsequent
overload alarm conditions.