Technical information

Chapter 6:
[sPDUMasterStatusVM] Master Status OIDs
PowerNet MIB Reference Guide
47
[sPDUMasterStatusVM] Master Status OIDs
The [sPDUMasterStatusVM] category has a read-only OID and a tabled set of read-only OIDs that provide information
on the status of the MasterSwitch VM unit.
OID Information Reported
sPDUMasterStatusVMTableSize
The number of MasterSwitch VM units.
{sPDUMasterStatusVMTable}
{sPDUMasterStatusVMEntry}
sPDUMasterStatusVMIndex
sPDUMasterStatusVMName
sPDUMasterStatusVMCommandPending
sPDUMasterStatusVMOverloadCondition
sPDUMasterStatusVMLowLoadCondition
sPDUMasterStatusVMCurrentLoad
sPDUMasterStatusVMMaxLoad
sPDUMasterStatusVMOutletCount
sPDUMasterStatusVMRebootDuration
Information about the status of a specified MasterSwitch VM unit.
• The index to the MasterSwitch VM unit
’s entry (read-only).
• The name of the MasterSwitch VM unit (read-only). (You use the
sPDUMasterConfigVMName OID to define this name.)
• One of the following:
- commandPendingMasterTrueVM (1) if the MasterSwitch VM
unit has a pending command on any of its outlets.
- commandPendingMasterFalseVM (2) if there are no pending
commands.
• One of the following:
- overloadConditionTrueVM (1) if the
sPDUMasterConfigVMHighLoadWarningThreshold OID is
violated.
- overloadConditionFalseVM (2) if the
sPDUMasterConfigVMHighLoadWarningThreshold OID is not
violated.
• One of the following:
- lowLoadConditionTrueVM (1) if the
sPDUMasterConfigVMLowLoadWarningThreshold OID is
violated.
- lowLoadConditionFalseVM (2) if the
sPDUMasterConfigVMLowLoadWarningThreshold OID is not
violated.
• The total power being used by the attached equipment as a
percentage of full load.
• The total power, in Amperes, that the MasterSwitch VM unit can
provide.
• The number of controllable outlets for the MasterSwitch VM unit.
• The largest sPDUOutletConfigVMRebootDuration OID time for
the MasterSwitch VM unit