Technical information

Chapter 7:
[sPDUIdentMSP] Identification OIDs
PowerNet MIB Reference Guide
52
[sPDUIdentMSP] Identification OIDs
The [sPDUIdentMSP] category has a read-only OID and a tabled set of read-only OIDS that return values for
MasterSwitch Plus unit identification parameters.
Note:
The last five OIDs in the following table are set at the factory.
OID Information Reported
sPUIdentMSPTableSize The number of MasterSwitch Plus units.
{sPDUIdentMSPTable}
{sPDUIdentMSPEntry}
sPDUIdentMSPIndex
sPDUIdentNameMSP
sPDUIdentHardwareRevMSP
sPDUIdentFirmwareRevMSP
sPDUIdentDateOfManufactureMSP
sPDUIdentModelNumberMSP
sPDUIdentSerialNumberMSP
View the following information about a specified MasterSwitch Plus
unit.
• The index to the MasterSwitch Plus unit’s entry.
• The name of the MasterSwitch Plus unit (read only) (You use the
sPDUMasterConfigMSPName OID to define this name).
• The MasterSwitch Plus unit’s hardware version.
• The MasterSwitch Plus unit’s firmware version.
• The date on which the MasterSwitch Plus unit completed the
manufacturing process, in mm/dd/yyyy format.
• The MasterSwitch Plus unit’s model number.
• The MasterSwitch Plus unit’s serial number.