Technical information

Chapter 7:

[sPDUOutConfigMSPmups] Outlet Configuration OIDs

PowerNet MIB Reference Guide

OID Task

{sPDUOutletConfigMSPmupsTable}

{sPDUOutletConfigMSPmupsEntry}

sPDUOutletConfigMSPmupsIndex

sPDUOutletConfigMSPmupsName

sPDUOutletConfigMSPmupsOutletIndex

sPDUOutletConfigMSPmupsOutletName

sPDUOutletConfigMSPmupsZone1

sPDUOutletConfigMSPmupsZone2

sPDUOutletConfigMSPmupsZone3

sPDUOutletConfigMSPmupsZone4

sPDUOutletConfigMSPmupsP1LowHum

sPDUOutletConfigMSPmupsP1HiHum

sPDUOutletConfigMSPmupsP1LowTemp

sPDUOutletConfigMSPmupsP1HiTemp

sPDUOutletConfigMSPmupsP2LowHum

sPDUOutletConfigMSPmupsP2HiHum

sPDUOutletConfigMSPmupsP2LowTemp

sPDUOutletConfigMSPmupsP2HiTemp

View and configuration a spcifived outlet. (The

sPDUMasterStatusMSPOutletCount OID identifies the number

of table entries.)

• The index to the MasterSwitch Plus unit’s entry (read only).

• The name of the MasterSwitch Plus unit (read only). (You use the

sPDUMasterConfigMSPName OID to define this name).

• The outlet number (read only)

• The name of the outlet (read only). (You use the

sPDUOutletConfigMSPallOutletName OID to define this

name).

• For this outlet, enable or disable any of the alarms for zone 1, 2,

3, or 4 that the Environmental Monitor is monitoring.

- disableAlarm (1): Disable the alarm for the zone number in

the OID name, e.g. to disable the alarm for zone 3, set this

value for the OID sPDUOutletConfigMSPmupsZone3.

- enableAlarm (2): Enable the alarm for the zone number in the

OID name.

• Enable or disable the Probe 1 low humidity alarm for the outlet.