Specifications

Part Number AR8402

Part Number AR8400

Part Number AR8445-3”

Part Number AR8446-6”

Part Number AR8440-3”

Part Number AR8441-6”

Part Number AR827

Part Number AR8425-1U

Part Number AR8426-2U

Part Number AR8421

Part Number AR8420

2U Blanking Panel

The 2U Blanking Panel adds a finished look to your configuration by covering up blank spaces. The black 2U Panel

is made from 16 gauge steel and ships with mounting hardware

Hardware Kit

Each 2-Post Rack ships with a standard quantity 24 black #12-24 x 0.5” pilot point equipment mounting screws. For

those configurations that require additional screws the Hardware Kit provides an additional 100 screws.

Vertical Cable Organisers

Vertical Cable Organisers mount to either side of the 2-Post rack and provide vertical cable management for the

entire height of the rack. The 3” version (p/n AR8440) is typically used with a single rack or at the end of lineup of

racks. The 6” version (p/n AR8441) is typically used between two configured racks. Each black organiser comes stan-

dard with seven integrated hoops and seven pass through holes.

Vertical Organiser Control Brackets

Vertical Organiser Control Brackets are used in conjunction with the Vertical Cable Organisers to provide cable

containment in the rear of the organisers. Each black control bracket easily attaches directly to the mounting holes

on the 2-Post Rack. The 3” version (p/n AR8445) is used with the 3” wide Vertical Organiser at the end of rack. The

6” version (p/n AR8446) is used with the 6” wide Vertical Organiser mounted between two configured racks.

2U Patch Cord Organiser

The Patch Cord Organiser provides excellent horizontal and vertical cable management and helps simplify the

routing of patch cords. Each black organiser has four integrated cable hoops for horizontal routing and 24 cable

hoops for vertical routing.

Horizontal Cable Organisers

Horizontal Cable Organisers are ideal for routing cables in a rack or between racks in a multi-unit lineup. Two sizes

are available to meet application requirements: p/n AR8425 = 1U and p/n AR8426 = 2U. Each black organiser

provides four integrated cable hoops.

Heavy Duty Shelf

The heavy-duty shelf is designed to support heavier weight requirements of equipment rated up to 150 lbs (68 kg).

There are three different types of mounting positions for the shelf providing a flexible solution to users in choosing

how the equipment is mounted in the rack. The shelf has a 17” (43.2cm) depth and is painted black.

Light Duty Shelf

The Light Duty Shelf is an all purpose shelf designed to handle equipment rated up to 50 lbs (22.7 kg). The shelf has

a 14” (35.6cm) depth making it ideal for small monitors, modems or other light weight networking equipment. The

shelf is painted black and uses a front mounted design.

NetShelter Rack Accessories

IV.