Specifications

PowerView

™

Part Number AP9215

Triple Expansion Chassis

™

UPS card chassis for network administrators that provides three additional manage-

ment slots for Smart-UPS, Matrix-UPS, Symmetra Power Array, and Silcon UPSs.

The Triple Expansion Chassis is an external expansion chassis designed to

accommodate any three APC accessory cards simultaneously. The Triple

Expansion Chassis is ideal for use with APC UPSs that require additional bays

for management accessories.

Features include:

• Enables simultaneous monitoring and management via multiple (up to 3)

cards for increased manageability of your network UPS.

• Designed for use in a stand-alone or rack-mount environment, requiring only

1U of space.

• Supplied with rack-mountable hardware and UPS connection cable.

Part Number AP9604

Hand-held control panel for network administrators that configures and controls

UPSs in rack, computer room, and datacentre environments.

The PowerView UPS Management Display is a hand-held control panel that

provides full control and local monitoring of the connected UPS. A key benefit of

this product is its ability to learn configurations at a UPS and download to other

units. This allows for time and cost savings when setting up data centres and

server rooms. With monitoring and control parameters such as input voltage,

level of redundancy, and temperature and humidity, the display helps manage

APC Smart-UPS, Matrix-UPS, and Symmetra Power Array from a monitoring

station up to 15’ (430cm) away.

Features include:

The operation of the display is divided into six functional areas, each accessible

through an item in the top-level menu:

UPS status, setup and control—Multi-language—Backlight—Control/status of

accessories—Diagnostics—Event logging—Configuration of the display—

Configuration copy and download

Fingertip LED indicators

Four LED indicators across the upper face of the display show the opera-

tional status of the connected UPS:

• LOAD ON—Green indicates that the UPS is supplying power to the load (elec-

trical device).

• ON BATTERY—Yellow indicates that power to the attached load is being supplied

by the UPS batteries.

• BYPASS—Yellow indicates that power to the load is being supplied directly from

the power utility. The UPS has been effectively removed from the circuit

(Matrix-UPS and Symmetra models only).

• FAULT—Red indicates that the UPS has detected an internal fault condition.

UPS Management