Installation 24-Port 10/100 Ethernet Switch AP9224110
This manual is available in English on the enclosed CD. Dieses Handbuch ist in Deutsch auf der beiliegenden CD-ROM verfügbar. Este manual está disponible en español en el CD-ROM adjunto. Ce manuel est disponible en français sur le CD-ROM ci-inclus. Questo manuale è disponibile in italiano nel CD-ROM allegato. 本マニュアルの日本語版は同梱の CD-ROM からご覧になれます。 O manual em Português está disponível no CD-ROM em anexo.
Contents Installation ....................................................................... 1 Preliminary Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Preliminary Information Overview The American Power Conversion (APC®) Ethernet Switch (AP9224110) is a multi-port switch that can be used to create high-speed backbone connections among switches, servers, databases, and end stations. The switch fits into any enterprise-level network as an exit to the backbone switch.
Power Ethernet Switch 2 4 6 8 10 12 14 16 18 20 22 24 1 3 5 7 9 11 13 15 17 19 21 23 2 4 6 8 10 12 14 16 18 20 22 24 1 3 5 7 9 11 13 15 17 19 21 23 LNK/ ACT FDX/ COL LNK/ ACT FDX/ COL dmp0019a Front panel LED indicators (two for each RJ-45 port) 24 10/100Base-TX RJ-45 ports One Power LED indicator LED Indicators. The LED indicators provide real-time information on the operating status of the system. Status Description Power Green Power is on.
Installation Desktop installation Place the switch on a large, clean, level surface with a power outlet nearby. Make sure there is enough clearance around the switch for attaching cables and the power cord, and for air circulation. Attaching rubber feet. 1. Make sure the mounting surface on the bottom of the switch is free of grease and dust. 2. Remove the adhesive backing from the rubber feet. 3.
2. Choose a location for the unit: Note: The unit occupies one U-space. A notched hole (or a number, on newer enclosures) on the vertical rail of the enclosure indicates the middle of a U-space. a. Insert cage nuts (provided with the enclosure) above and below a notched hole on each vertical mounting rail in your chosen location. Warning: Install cage nuts horizontally, with the ears engaging the sides of the square hole.
Troubleshooting How to Resolve Problems This chapter describes common problems that may occur when using the switch and their possible solutions. First, use the information in this chapter to attempt to resolve a problem. If this information does not resolve the problem, contact APC Worldwide Customer Support using the numbers listed on the back cover of this guide.
Data path loops. Check for data path loops. There should be only one cabling path at any time between the switch and the device to which it connects. Transmission mode The RJ-45 ports use auto-negotiation to set the transmission mode to either full-duplex or half-duplex. Verify that each port is set to the same transmission mode used by the attached device. If the attached device operates at half-duplex, the default when auto-negotiation fails, it does not support auto-negotiation.
Technical Specifications 24-Port 10/100 Switch (AP9224110) Performance Transfer Rate 14,880 packets per second for 10 mbps 148,800 packets per second for 100 mbps MAC Address 4K MAC address table Memory Buffer 1.25 mbits Backplane 4.
Compliance Standard IEEE 802.1p CoS IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.
Radio Frequency Interference Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. USA —FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests. – www.apc.com (Corporate Headquarters) Connect to localized APC Web sites for specific countries, each of which provides customer support information. – www.apc.com/support/ Global support searching APC Knowledge Base and using e-support.
