User`s guide

–24–
MasterSwitch plus
How to Manage MasterSwitch
plus
Remote Management Interfaces
Overview
Once MasterSwitch
plus
has the proper network settings (see the
MasterSwitch
plus
Installation and Quick Configuration Manual for
instructions), MasterSwitch
plus
and an Environmental Monitoring Card
can be managed remotely on Web, Control Console, and SNMP
interfaces. Only one user at-a-time may access your MasterSwitch plus
unit. Serial Interface users have precedence over Telnet users and
Telnet users have precedence over Web users. Maps of each interface
are on page 64 and page 65.
Web interface
Use a Web browser to access the Web connection to MasterSwitch
plus.Inthe
URL
Location field, type http:// followed by your
MasterSwitch plus unit’s
IP
address. Alternately, you can enter the
DNS
name (requires a
DNS
server entry for the Management Card). See the
example below:
http://170.241.17.51
If the MasterSwitch plus unit’s Web Port is set to a value other than the
default value of
80
, enter the System
IP
address followed by a colon and
theconfiguredWebPortvalue(inthisexample
8000
). See the example
below:
http://170.241.17.51:8000
After entering your MasterSwitch plus unit’s
IP
address, press
ENTER
;a
prompt will ask for your user name and password. For first time use, the
default Administrator user name and password is apc, all lower case.
See page 64 for a map of the Web interface.
Note: Some Web interface features, including data verification,
Assistant Online, and
MD5
authentication require that you
enable JavaScript or Java.
Continued on next page