User`s guide

–38–
Menu Item Definitions
Network
continued
Telnet/Web .
SNMP .
SNMP: access
control
Continued on next page
Item Definition
Te l n e t
Access Enables or Disables Telnet Access.
Port
The
TCP/IP
port where the Telnet server for the MasterSwitch
plus unit resides.
Default:
port
23
Web
Access Enables or Disables Web Access.
Port
The
TCP/IP
port where the Web server for the MasterSwitch
plus unit resides.
Default:
port
80
Item Definition
SNMP Access Enables or disables
SNMP
access.
Access Control Controls access to each of the four
SNMP
channels.
Trap Receiver Defines the
NMS
s(upto
4
) that traps are sent to.
Item Definition
Community
Name
Password the
NMS
(identified by the
NMS IP
option) must
use for
SNMP
access to MasterSwitch plus. The allowed
access type is defined by the Access Type option.
Note: Up to 15 characters.
NMS IP
Configures the channel to allow only one
NMS
(using a
specific
NMS IP
address), or all
NMS
s(using
0.0.0.0
for the
NMS IP
value), to have access to the channel.
Access Type
Defines whether an
NMS
(identified by the
NMS IP
option)
can Write (use Gets and Sets), Read (use only Gets), or be
Disabled (cannot use Gets and Sets at all).