User`s guide

–10–
Product Description
LEDs
l
Descriptions
Continued on next page
LED Status Description
Basic port
On The Outlet is on.
Off The Outlet is off.
Mostly off The Outlet is scheduled to turn on.
Mostly on The Outlet is scheduled to turn off.
Flashing green
The outlet cannot turn on due to an
Environmental alarm.
MasterSwitch
plus Status
Flashing green The
UPS
is in Sleep mode.
Steady green The UPS
is operating Normally.
Steady red
The
UPS
has experienced an
AC
Fail condition
(
UPS
is On Battery).
Flashing red The
UPS
has asserted a Low Battery indication.
Flashing green
and red
MasterSwitch Plus is unable to communicate
with the
UPS
.
Management
Card Status
(
AP9225
only)
Off MasterSwitch Plus has no power.
Solid green MasterSwitch Plus has valid network settings.
Flashing green
MasterSwitch Plus does not have valid network
settings. See the Installation Manual for more
information.
Flashing red
slowly
MasterSwitch Plus is making a
BOOTP
request.
Solid red
A hardware failure has been detected by
MasterSwitch Plus.
Management
Card
Link-
RX/TX
(
AP9225
only)
Off
The device(s) that connects MasterSwitch Plus
to the network, whether a router, hub, or
concentrator, is off or not operating correctly.
Constant
Green
MasterSwitch Plus is connected to a functioning
network.
Flashing
Green
MasterSwitch Plus is receiving data packets
from the network.