User Manual

ManualsBrandsAPC ManualsOtherAPC AP9563 Rack PDU/Basic/1U/current input 16A/up to 20A/120V

Basic Rack Power Distribution Units (AP9562, AP9563,

AP9564)—Installation Instructions and Specifications

Overview

1 U, 15 A, 120 V, 5-15 (10) Basic Rack PDU (AP9562)

1 U, 20 A, 120 V, 5-20 (10), 5-20P Basic Rack PDU (AP9563)

One 15-amp circuit breaker

Ten NEMA 5-15 outlets

3.66-m (12-ft) NEMA 5-15 power cord

One 20-amp circuit breaker

Ten NEMA 5-20 outlets

3.66-m (12-ft) NEMA 5-20 power cord

pdu0087a

pdu0088a

Summary of content (8 pages)

PAGE 1
Basic Rack Power Distribution Units (AP9562, AP9563, AP9564)—Installation Instructions and Specifications Overview pdu0087a 1 U, 15 A, 120 V, 5-15 (10) Basic Rack PDU (AP9562) 1 One 15-amp circuit breaker 2 Ten NEMA 5-15 outlets 3 3.66-m (12-ft) NEMA 5-15 power cord pdu0088a 1 U, 20 A, 120 V, 5-20 (10), 5-20P Basic Rack PDU (AP9563) 1 One 20-amp circuit breaker 2 Ten NEMA 5-20 outlets 3 3.
PAGE 2
pdu0086a 1 U, 20 A, 120 V, 5-20 (10), L5-20P Basic Rack PDU (AP9564) 1 One 20-amp circuit breaker 2 Ten NEMA 5-20 outlets 3 3.66-m (12-ft) NEMA L5-20 power cord Mounting brackets 1 Brackets for horizontal mounting 2 Brackets for vertical mounting Note: Each rack PDU packaged with two types of mounting brackets (for horizontal and vertical mounting). Choose your mounting orientation and attach the appropriate brackets to the PDU for installation.
PAGE 3
Safety and Grounding Read the following information before installing or operating your rack power distribution unit (PDU): DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • • • • • • • • • • This PDU is intended for indoor use only. Do not install this PDU where excessive moisture or heat is present. Never install any wiring, equipment, or PDUs during a lightning storm. Plug this PDU into a three-wire, grounded power outlet only.
PAGE 4
Installation Horizontal mounting (any standard 19-inch EIA/ECA-310 rack or enclosure) Install the PDU in a NetShelter® or any standard 19-inch EIA/ECA-310 rack or enclosure, using the mounting brackets (provided). Attach the horizontal-mounting brackets to the PDU. pdu0085a 1. 2. Install the PDU using hardware included with your rack or enclosure. The PDU will occupy one U-space.
PAGE 5
Vertical mounting (any standard EIA-310 rack or enclosure) Install the PDU in a NetShelter or any standard 19-inch EIA-310 rack or enclosure, using the mounting brackets (provided). 1. Attach the vertical-mounting brackets to the PDU. 2. Install the PDU on a vertical mounting rail in your rack or enclosure.
PAGE 6
Specifications AP9562 AP9563 AP9564 16 A 16 A Electrical Input voltage range 100–120 V Maximum current draw (UL derated) 12 A Physical Size (h×w×d) 44× 447×57 mm (1.76×17.60×2.25 in) Shipping size (h×w× d) 70× 464×229 mm (2.75×18.25× 9.00 in) Weight 2.50 kg (5.50 lb) Shipping weight 3.64 kg (8.
PAGE 7
Warranty Limited warranty APC warrants the Rack Power Distribution Unit to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. This warranty does not apply to equipment that has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser.
PAGE 8
Customer support and warranty information is available at the APC Web site, www.apc.com. © 2011 APC by Schneider Electric. All trademarks are owned by Schneider Electric Industries S.A.S., American Power Conversion Corporation, or their affiliated companies.