Installation and Operation Rack Power Distribution Unit AP9559 AP9565 AP9566 AP9570 Publication Date: May 2016 990-7213D-001
Schneider Electric Legal Disclaimer The information presented in this manual is not warranted by Schneider Electric to be authoritative, error free, or complete. This publication is not meant to be a substitute for a detailed operational and site specific development plan. Therefore, Schneider Electric assumes no liability for damages, violations of codes, improper installation, system failures, or any other problems that could arise based on the use of this Publication.
Contents General Information ............................. 1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety and grounding information . . . . . . . . . . . . . . . . . . . 1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Receiving . . . . . . . . . . . . . . . . . . . . . 2 Inventory . . . . . . . . . . . . . . . . . . . . . 2 Material recycling . . . . . . . . . . . . . . 2 Installation ............................................ 3 Install the Rack PDU . .
General Information Safety Safety and grounding information Read the following information before installing or operating your Schneider Electric Rack Power Distribution Unit (PDU). DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • This PDU is intended for indoor use only. • Do not install this PDU where excessive moisture or heat is present. • Never install any wiring, equipment, or PDUs during a lightning storm. • Plug this PDU into a three-wire, grounded power outlet only.
Overview Receiving Inspect the package and contents for shipping damage. Make sure all parts were sent. Immediately report any shipping damage to the shipping agent. Report missing contents, product damage, or other problems with the product to APC by Schneider Electric or your Schneider Electric reseller. Inventory Item Quantity Basic Rack PDU 1 Horizontal mounting brackets 2 Vertical mounting brackets 2 8-32 flat-head Phillips screws 8 Material recycling The shipping materials are recyclable.
Installation Install the Rack PDU (AP9559, AP9565, AP9566, AP9570) Mounting options Choose the mounting option for your PDU, depending on your preferences and the type of enclosure. • Vertical mounting –For any standard 19-in rack, you can attach the brackets to the enclosure using the screws provided. –AP9559 only: For a NetShelter VX enclosure (AR2100 series), you can mount the brackets to the enclosure by snapping them into place (toolless mounting).
Attaching brackets to the PDU 1. Decide where and how you will mount the PDU in the enclosure. (See the figures on the following pages.) pdu0095a 2. Choose the appropriate mounting brackets, as shown below, for the option you chose: – for 19-in vertical mounting – for horizontal mounting –AP9559 only: for toolless mounting 3. 4 Attach the brackets to the unit using four flat-head Phillips screws (provided) for each bracket.
Mounting the PDU (using screws) pdu0083a Vertical-mount (19-in) pdu0080a Horizontal-mount (1 U space) Rack Power Distribution Unit 5
Mounting the AP9559 Rack PDU (toolless mounting) pdu0092a This option for mounting the PDU is available for NetShelter VX enclosures only. 6 1. Holding the PDU in the direction shown below, slide the mounting pegs into the holes provided in the channel in the rear panel of the enclosure. 2. Snap the PDU into place by pushing it downward until it locks into position.
Operation pdu0094a AP9559 IEC-320-C20 input connector (16 A @ 240 V; 20 A @ 120 V) used with detached power cord (supplied).
AP9566 12 IEC-320-C13 outlets 12-foot NEMA L6-20 power cord AP9570 2 20-amp circuit breakers 4 IEC-320-C19 outlets 12-foot NEMA L6-30 power cord 8 Rack Power Distribution Unit
Specifications Item AP9559 AP9565 Specification Specification Power Input voltage range 120 –240 V 100 – 240 V Input frequency 50/60 Hz 50/60 Hz 16 A (UL, CUL, Maximum VDE) current draw 16 A (VDE) 16 A (UL, VDE) 12 A (CUL) Input connector IEC-320-C20 input connector (16 A @ 240 V; 20 A IEC 320 C20 inlet @ 120 V) used with detached power cord (supplied). Output connectors 2 IEC-320-C19 outlets 10 IEC-320-C13 outlets 12 IEC 320 C13 outlets Physical 17.60 × 1.75 × Dimensions 2.
Item AP9566 AP9570 Specification Specification Power Input voltage range 208 V 208 V Input frequency 50/60 Hz 50/60 Hz Maximum 16 A (UL, CUL) current draw 24 A (UL, CUL) Input connector NEMA L6-20 plug NEMA L6-30 plug Output connectors 12 IEC-320-C13 outlets 4 IEC-320-C19 outlets Physical 1.75 × 17.60 × Dimensions 2.25 in (L × W × D) (4.45 × 44.70 × 5.72 cm) 1.75 × 17.60 × 2.50 in (4.45 × 44.70 × 6.35 cm) Weight 5.5 lb (2.5 kg) 6.0 lb (2.72 kg) Shipping weight 8.0 lb (3.
Life Support Policy General policy Schneider Electric does not recommend the use of any of its products in the following situations: • In life-support applications where failure or malfunction of the Schneider Electric product can be reasonably expected to cause failure of the life-support device or to affect significantly its safety or effectiveness. • In direct patient care.
Factory Warranty This warranty applies only to the products you purchase for your use in accordance with this manual. Terms of warranty Schneider Electric warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase. Schneider Electric will repair or replace defective products covered by this warranty.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, OF PRODUCTS SOLD, SERVICED OR FURNISHED UNDER THIS AGREEMENT OR IN CONNECTION HEREWITH. SCHNEIDER ELECTRIC DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTION AND FITNESS FOR A PARTICULAR PURPOSE.
Warranty claims Customers with warranty claims issues may access the Schneider Electric customer support network through the Support page of the Schneider Electric Web site, www.apc.com/ support. Select your country from the country selection pull-down menu at the top of the Web page. Select the Support tab to obtain contact information for customer support in your region.
Worldwide Customer Support Customer support for this or any other product is available at www.apc.com © 2016 Schneider Electric. APC and NetShelter are owned by Schneider Electric Industries, S.A.S. All other trademarks are property of their respective owners.
