Specifications

6 Implementing UPS Configurations with Microsoft Cluster Server
The UPS was designed to mount to any standard EIA RS-310 (ANSI C83.9) 19''
equipment rack.
More information available at:
http://www.apcc.com/products/techspecs/index.cfm?base_sku=SU2200RMXLINET
2.1.2 SU3000RMINET (5U unit)
SU3000RMINET is a rack-mounted UPS with expandable run time via one
battery pack.
Table 3. Technical specifications
The typical SU3000RMINET on-battery run times versus VA load, in minutes
(with SU48BP) are as follows:
Table 4. Run time SU3000RMINET
VA/W ratings Maximum 3000 VA or 2250 W
Optional battery pack SU48BP (4 x 12 V DC and 17 Ah. Nominal system voltage
48 V DC). Only one pack can be connected. The battery pack
itself isn't rack-mountable and must be placed on a supporting
tray behind the UPS (SU035).
Dimensions: UPS Height 22.2 cm x width 48.3 cm x depth 45.1 cm.
(Depth is measured from front of bezel to back of chassis, with
a half-inch allowance for screws and outlets.)
Battery pack Height 21.6 cm (5U) x width 17.0 cm x depth 43.9 cm
Maximum input current 15 Amps (for nominal line voltages indicated and load
p.f. ~ 0.7 includes load current)
Input resettable circuit
breaker rating
20 Amps
Input wiring devices IEC 320 C20 16 Amp outlet (1x)
Hardwiring input option Not available
Output wiring devices IEC 320 C19 16 Amp outlet (1x)
IEC 320 C13 10 Amp outlet (8x)
Software monitoring and
management
940-0024C black APC serial cable (smart-signaling mode)
Software compatible with
the UPS
PowerChute PLUS 5.1 for Windows NT
PowerChute PLUS 5.2 for Windows NT/2000
Replacement battery
cartridge
RBC11
Load Internal battery With external battery pack
1000VA 26 73
1200VA 20 58
1400VA 16 42
1600VA 13 35
2000VA 10 25