Specifications

8 Implementing UPS Configurations with Microsoft Cluster Server
Figure 3. APC Smart UPS 3000 — rear view
In Figure 2 and Figure 3, you can see the APC Smart UPS 3000 that you can get
as an IBM option. Technical data is identical with the 5U model, but the option to
increase the run time with an additional battery pack is not available.
2.1.3 SU5000RMINET
SU5000RMINET is a rack-mount UPS. The extended run time feature isn't
available for this model.
Table 5. Technical specifications
VA/W ratings Maximum 5000 VA or 3750 W
Dimensions: UPS Height 22.9 cm (5U) x width 43.9 cm x depth 66.5 cm.
(Depth is measured from front of bezel to back of chassis,
with a half-inch allowance for screws and outlets.)
Maximum input current 30 Amps (for nominal line voltages indicated and load
p.f. ~ 0.7 includes load current)
Input resettable circuit breaker
rating
30 Amps
Input wiring devices Hardwired only
Hardwiring input option Yes
Output wiring devices IEC 320 C19 16 Amp outlet (2x)
IEC 320 C13 10 Amp outlet (8x)
Software monitoring and
management
940-0024C black APC serial cable (smart-signaling mode)
Softwarecompatiblewiththe
UPS
PowerChute PLUS 5.1 for Windows NT
PowerChute PLUS 5.2 for Windows NT/2000
Replacement Battery
Cartridge
2x RBC12