Specifications

Chapter 3. UPS configurations for cluster 47
Figure 44. Disable remote monitoring
9. In this window, select the box to enable the PowerChute PLUS remote
monitoring function. For details see the PowerChute PLUS documentation.
10.Finish the installation by clicking the Next button. If you wish, you can now
register your hardware and software with APC.
3.2.7 Configuring PowerChute PLUS on the node with a grey serial cable
Now we configure the time intervals as shown in Figure 19 on page 28, and we
define the actions according to the events described in 2.4.1.3, “PowerChute
events” on page 19.
1. Start PowerChute PLUS. You see a window (shown in Figure 45) with all
servers in the same IP subnet segment where the PowerChute PLUS software
is installed.
Figure 45. Single UPS Monitor Server