Specifications

Chapter 3. UPS configurations for cluster 61
Figure 61. Install PowerChute PLUS — automatically detect the UPS
6. Your UPS has been discovered correctly. Otherwise you can select the UPS
type and COM port manually from the pull-down menus. Click the Next button
and Figure 62 will be displayed.
.
Figure 62. Install PowerChute PLUS — remote monitoring
7. In this window, check the box to enable the PowerChute PLUS remote
monitoring function. For details see the PowerChute PLUS documentation.
8. Finish the installation by clicking Next. If you wish, you can now register your
hardware and software with APC.
3.3.7 Configuring PowerChute PLUS
Now we configure the time intervals as shown in Figure 19 on page 28, and we
define the actions according to the events as described in 2.4.1.3, “PowerChute
events” on page 19. The following steps have to be made on both nodes: