Datasheet

Installation: How to Reverse the Front Door
16 NetShelter VS Enclosure
Reinstall the hinge pin brackets:
5. Reinstall the hinge pin brackets on the opposite side
of the enclosure:
a. Remove the small plastic plugs covering the
insertion holes in the base and the top of the
enclosure frame. Reinstall them in the holes on the
opposite side of the enclosure.
b. Relocate the two hinge pin brackets from their
original position

to their new position

.
Secure by tightening the screws.
Reinstall the latch plate and bumpers.
6. Relocate the latch bracket and the two door bumper
brackets from their original position

to their new
position

.
Note
Be sure to maintain the original spacing
between the latch plate and bumpers,
and their vertical relationship with the
enclosure frame.
Note
On the enclosure without sides, the
baying trim is attached to the same
holes used by the bumpers and latch
bracket.









