Datasheet

NetShelter VS Enclosure 25
How to Join Enclosures
You can expand your installation by joining two enclosures together. Enclosures without sides
include pre-installed baying hardware. Enclosures with sides do not include baying hardware.
To join together two NetShelter VS enclosures with sides or a NetShelter VS enclosure and a
NetShelter VX enclosure, one of the following kits (available from APC) is required.
Before joining enclosures
To join an enclosure with sides to an enclosure without sides, you will first need to move some of the
baying hardware from the enclosure without sides to the enclosure with sides.
Remove the side panel from the enclosure with sides, if necessary.
Move the baying trim from one side of the enclosure without sides to the other side, if necessary.
To join together two enclosures without sides, see “How to Connect Enclosures Together” on
page 29.
SKU Description
AR8376 Beige 42U enclosures
AR8376BLK Black 42U enclosures
AR8377BLK Black 47U enclosures
See “How to Remove and Install the Side Panels” on page 11.
See “How to Move the Baying Hardware” on page 26.