Datasheet

How to Join Enclosures: How to Move the Baying Hardware
NetShelter VS Enclosure 27
4. Using the two pan-head socket
screws and nuts, fasten the baying
brackets with baying trim
attached that you removed in
step 3 to the front right vertical
frame of the enclosure on the left.
5. Remove the low-profile socket
screw from the baying plate on the
right-rear side of the enclosure
without sides. Leave the baying
bracket attached. Save the screw
and baying plate for use in the
next step.
6. Using the low-profile socket
screw, secure the baying plate with
baying bracket attached that you
removed in step 5 to the right-rear
side of the enclosure with sides.