Datasheet

How to Join Enclosures: How to Move the Baying Hardware
28 NetShelter VS Enclosure
When the enclosure with side panels is on the right
1. Carefully slide the enclosures apart.
2. Remove the left side panel of the enclosure with sides.
3. Remove the pan-head screw and nut
securing each of the baying brackets
from the front-left vertical frame of
the enclosure on the left without
sides. Save the pan-head screws,
nuts, and baying brackets for use in
the next step.
4. Using the pan-head screws and nuts,
secure the baying brackets to the
front-left vertical frame of the
enclosure on the right.
5. Install the side panel removed in step 2 on the left side of the enclosure without sides (optional).
See “How to Remove and Install the Side Panels” on page 11.
See “How to Remove and Install the Side Panels” on page 11.