Datasheet

Retrofit Kit for Dell

2450/2400

Servers — AR8004

990-6047 1/2 07/2000

Overview

Use this kit to mount a Dell

model 2450 or 2400 server into an American Power Conversion (APC)

NetShelter enclosure.

Inventory

To o l s R e q u i r e d

• Phillips screwdriver

•Pencil

Mounting Instructions

Item Qty

Right Slide Assembly 1

Left Slide Assembly 1

Right Server Adapter Plate Assembly 1

Left Server Adapter Plate Assembly 1

10-32 × 5/8" Phillips Pan Head Screw 4

Flat Washer 4

10-32 Caged Nuts 2

Step Action Figure

1 Choose a location for the server on the vertical

mounting rails according to server model, and

mark the top and bottom of the chosen U-space

on the front and rear vertical mounting rails. (A

U-space consists of a notched mounting hole and

one hole immediately above and below it.)

Caution: Plan to place heavier components

towards the bottom of the enclosure.

PAGE 1
Retrofit Kit for Dell ® 2450/2400 Servers — AR8004 Overview Use this kit to mount a Dell® model 2450 or 2400 server into an American Power Conversion (APC) NetShelter enclosure.
PAGE 2
Step Action Figure 2 Insert the tab of each slide assembly’s front mounting bracket downward into the appropriate mounting hole as shown. Press down on the bracket until it rests against the rail. Dell 2400 only: Install a caged nut in the 4th mounting hole from the bottom of the of the U-space chosen in step 1. Repeat for the other front rail.