manual

2-U Patch Cord Horizontal Cable

Organizer for NetShelter

SX or VX

Enclosures

Tools required

Hardware (provided)

Installing cage nuts

Horizontal cable organizers must be attached to cage nuts, which are provided.

Caution: Install cage nuts horizontally, with the ears engaging the sides of the square

hole. Do NOT install cage nuts vertically with the ears engaging the top and bottom of the

square hole.

1. Insert the cage nut into the square hole by

hooking one ear of the cage nut assembly

through the far side of the hole.

2. Place the cage nut tool (provided) on the other

side of the cage nut and pull to snap it into

position.

Product SKU Description Figure

19-inch EIA

2-U patch cord

organizer

AR8427A

Route cables horizontally on the front or back

of the 19-inch EIA enclosure.

Cage nut tool (1)

(provided)

Phillips

screwdriver (1)

(not provided)

M6 x 16

Phillips slot

screws (4)

Cage nuts (4)

Note: Install the cage nuts on the

interior of the vertical mounting flanges.

PAGE 1
2-U Patch Cord Horizontal Cable Organizer for NetShelter® SX or VX Enclosures Product SKU Description Figure 19-inch EIA 2-U patch cord organizer AR8427A Route cables horizontally on the front or back of the 19-inch EIA enclosure. Tools required Cage nut tool (1) (provided) Phillips screwdriver (1) (not provided) Hardware (provided) M6 x 16 Phillips slot screws (4) Cage nuts (4) Installing cage nuts Horizontal cable organizers must be attached to cage nuts, which are provided.
PAGE 2
Installing the horizontal cable organizer Customer support and warranty information is available at the APC Web site, www.apc.com. © 2006 American Power Conversion. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective owners.