User Guide

Back-UPS Pro BR 1000/1350/1500 MS
10
Specifications
Replacement Battery
The battery typically lasts for 3 to 5 years, a shorter period if subjected to frequent
outages or elevated temperatures. Battery replacement parts for Back-UPS Pro
BR1000MS is APCRBC160, for BR1350MS is APCRBC161, and for BR1500MS is
APCRBC163. Delaying the replacement of parts may corrode the batteries in the
cartridge. Recycle spent battery cartridges.
Warranty
The standard warranty is three (3) years from the date of purchase. Schneider Electric IT
(SEIT) standard procedure is to replace the original unit with a factory reconditioned
unit. Customers who must have the original unit back due to the assignment of asset tags
and set depreciation schedules must declare such a need at first contact with an SEIT
Technical Support representative. SEIT will ship the replacement unit once the defective
unit has been received by the repair department, or cross ship upon the receipt of a valid
credit card number. The customer pays for shipping the unit to SEIT. SEIT pays ground
freight transportation costs to ship the replacement unit to the customer.
BR1000MS BR1350MS BR1500MS
VA 1000 VA 1350 VA 1500 VA
Maximum Load 600W 810W 900W
Nominal Input Voltage 120 V
Online Input Voltage Range 88 - 147 V
Automatic Voltage Regulation
Boost by +11.5% when input voltage drops below limit
Trim by -11.5% when input voltage exceeds limit
Frequency Range 60 Hz ± 3 Hz
On-battery Waveshape sine-wave
USB charging port Type C*1, Type A*1 (15W in total)
Typical Recharge Time 16 hours
Transfer Time 8 ms, maximum
Operating Temperature 32 to 104
o
F (0 ~ 40
o
C)
Storage Temperature 23 to 113
o
F (-15 ~ 40
o
C)
Unit Dimensions 11.9 ×4.4 ×15.0 in (368 ×100 ×260 mm)
Unit Weight
22.5 lb (10.2 kg)
25.8 lb (11.7 kg) 27.6 lb (12.5 kg)
Interface USB and Simple Signal
On-Battery Runtime Go to: http://www.apc.com/product