Technical data

1-6 User’s and Service Guide
Agilent Technologies 87050A Option H15
Installing the Test Set
5. Ensure that there are at least two inches of clearance around the
sides and back of the test set and the system cabinet (if used). Refer
to Figure 1-2.
Figure 1-2 Ventilation Clearance Requirements
CAUTION Ventilation Requirements: When installing the instrument in a cabinet,
the convection into and out of the instrument must not be restricted.
The ambient temperature (outside the cabinet) must be less than the
maximum operating temperature of the instrument by 4° C for every
100 watts dissipated in the cabinet. If the total power dissipated in the
cabinet is greater that 800 watts, then forced convection must be used.