Technical data

2-2 User’s and Service Guide
Getting Started
Getting Started
Getting Started
Connecting and Turning on the Test Set
The test set is designed to be placed underneath the network analyzer
in a rack system and connected to it as shown in Figure 2-1 (if you are
using a standard Agilent 8753D/E) or Figure 2-2 on page 2-3 (if you are
using an Agilent 8753D/E Option 011 specifically). Use the two
type-N (m) to type-N (m) semi-flexible cables (Agilent part number
8120-6995) and two APC-7 to type-N (f) adapters (Agilent part number
85054-60001) that were shipped with the test set. Refer to Table 1-1 on
page 1-3.
Figure 2-1 Connecting the Test Set to the Agilent 8753E Network Analyzer
PORT 2
WITH APC-7 TO
TYPE-N (F) ADAPTER
(P/N 85054-60001)
AGILENT 8753E
NETWORK ANALYZER
AGILENT 87050A OPTION H15
PORT 1
WITH APC-7 TO
TYPE-N (F) ADAPTER
(P/N 85054-60001)
REFLECTION TRANSMISSION