Technical data

3-2 User’s and Service Guide
The Front and Rear Panels
Front Panel
Front Panel
Figure 3-1 Front Panel
Line Power Switch
The test set line power switch is located at the bottom left corner of the
front panel. See Figure 3-1. The line power switch turns the power to
the test set either on or off.
The front panel line switch disconnects the mains circuits from the
mains supply after the EMC filters and before other sections of the
instrument.
Ports 1–16
Ports 1 through 16 are 50 Ω SMA connectors that are used to connect to
the device under test.
CAUTION Do not input more than 1 watt (RF and DC combined) to these ports, or
damage to the internal RF switches or the analyzer may occur.
Ports 1 - 16
(SMA)
Ground Connector
Line Power Switch
Reflection
(Type-N)
Transmission
(Type-N)
Port Connection
Status