Technical data

User’s and Service Guide 3-3
The Front and Rear Panels
Front Panel
The Transmission and Reflection Ports
The transmission and reflection ports are 50 Ω type-N connectors. A
50
Ω cable connects directly to the Reflection/Transmission port or Port
1/Port 2 of the network analyzer by means of the cables
(Agilent part number 8120-6995) and adapters (Agilent part number
85054-60001) that were shipped with your test set.
CAUTION Check your analyzer documentation for power levels above which the
ports can be damaged. Make sure that your test setup will not cause
those levels to be exceeded.
The Ground Connector
The ground connector on the front panel provides a convenient ground
connection for a standard banana plug.
The Port Connection Status LCD
The port connection status LCD provides visual feedback of which
port(s) are connected to the Transmission and Reflection ports of the
test set. When the LCD displays a path connection, all other
corresponding test ports are internally terminated in 50
Ω.