Technical data

User’s and Service Guide 5-11
Controlling the Test Set and Making Measurements
Commands
Figure 5-3 Controlling the Test Set
Measuring Reflection
By leaving the DUT connected as in Figure 5-3, and setting the network
analyzer to measure S11, you can measure reflection or return loss.
Example Program
An example program for making measurements is briefly described and
listed on the following pages. This program is written in HP BASIC and
is for use with an HP 9000 series 200/300/700 computer. Use this
example program to create a program for your specific needs.
CONTROLLER
GPIB
AGILENT 87050A OPTION H15
DUT
IN OUT
AGILENT 8753E
NETWORK ANALYZER
PARALLEL
PORT
PARALLEL
PORT INPUT