Technical data

5-18 User’s and Service Guide
Controlling the Test Set and Making Measurements
Commands
1580 WAIT 3
1590 END SELECT
1600 ELSE
1610 DISP "Unknown command """;Command$;""""
1620 BEEP 300,.1
1630 WAIT 3
1640 END IF
1650 END SELECT
1660 END IF
1670 END LOOP
1680 END
1690 !
1700 SUB Set_switches(Addr,First_parm$,Second_parm$, Contr
oller$)
1710 !====================================================
1720 ! PURPOSE:To set the Agilent 87050A Option H15
switches.
1730 !----------------------------------------------------
1740 !
1750 ! PARAMETERS:
1760 !
1770 ! Controller$: [P|H] P=Parallel via Agilent
8753D,E or H=GPIB
1780 ! First_parm$: [REFL|TRANS]
1790 ! Second_parm$: [0|1|2|...16]
1800 ! Addr: GPIB addr of Agilent 8753D,E or
Agilent 87050A-H15 depending
1810 ! on H or P above.
1820 !----------------------------------------------------
1830 !
1840 ! DESCRIPTION:
1850 !
1860 ! Commands can be sent via Centronics (Parallel) port
or via GPIB
1870 ! Choice depends upon variable Controller$ [P|H]
1880 !