Central Server Installation Manual
Table Of Contents
- Product Description
- Installation
- Installation Instructions
- Before You Begin
- RapidRails Rack Kit Contents
- Installation Tasks
- Communication Connection
- Network overview
- Set up the Private LAN
- Route network cables to the InfraStruXure Central server and switch (or hub)
- Connect the InfraStruXure Central server to your Public LAN
- Connect the InfraStruXure Central server to your Private LAN
- Apply power to the InfraStruXure Central server and switch (or hub)
- Initial Configuration
- Product Information
- Appendix A: LED Error Codes
- Appendix B: Diagnostic Messages
- Warranties and Policies
13InfraStruXure Central Installation Manual
Standard model (front)
Item Function
DVD Drive
Allows CD/DVD-based updates for software and firmware. (Not
available on the Basic model)
Diagnostic
Indicators
The four diagnostics indicators on the system front panel display
error codes during system startup.
Power-on
Indicator,
Power Button
The power-on indicator lights when the system power is on. The
power-on indicator blinks when the system is not turned on but
power is available. The power button controls the power supply
output to the system.
NMI button The NMI button is used to troubleshoot software and device driver
errors when using certain operating systems. This button can be
pressed using the end of a paper clip. Use this button only if
directed to do so by qualified support personnel.
USB Ports (2) Used to connect USB 2.0-compliant devices to the system.
HDD LED
Hard disk drive LED. When this LED is amber, the disk is being
accessed.
Monitor VGA monitor port.
System
Identification
Button
The identification buttons on the front and back panels can be used
to locate a particular system within a rack. When one of these
buttons is pushed, the blue system status indicator on the front and
back blinks until one of the buttons is pushed again.