Operating instructions

101InRoom Controller - Operating Instructions

Control console

After you log on at the control console, as described in “Remote access to the control console” on page 100:

1. Choose Network

from the Control Console menu.

2. Choose

TCP/IP from the Network menu.

3. If you are not using a BOOTP or DHCP server to conﬁgure the TCP/IP settings, select the

Boot Mode

menu. Select Manual boot mode, and then press ESC to return to the TCP/IP menu.

(Changes will take effect when you log out.)

4. Set the System IP, Subnet Mask

, and Default Gateway address values.

5. Press CTRL+C to exit to the Control Console menu.

6. Log out (option 4 in the Control Console menu)