Datasheet

CSI SECTION 16611 STATIC UNINTERRUPTIBLE SYSTEM/PDU/DISTRIBUTION

CSI SECTION 16611 STATIC UNINTERRUPTIBLE SYSTEM

1. The Enclosure shall be designed to provide a secure, managed environment for

computer and networking equipment.

2. The Enclosure shall conform to EIA-310 Standard for Cabinets, Racks, Panel and

Associated Equipment and accommodate industry standard 19” rack mount

equipment.

3. The Enclosure shall be designed with four (4) vertical posts to allow rack mount

equipment installation utilizing four (4) vertical mounting rails.

4. The Enclosure shall be available with a vertical equipment mounting space of

25U, 42U or 47U. (1U=1.75” or 44.45mm)

5. A four-post open frame configuration shall be available with 42U vertical

equipment mounting space.

B. Physical Requirements

1. External Width Dimensions shall be 597mm (23.5”) for 19” rack enclosures, and

747mm (29.4”) for 23” rack enclosure.

2. External Depth Dimensions shall be 900mm (35.4”) or 1070mm (42.2”)

3. Rack enclosures of a 42U design shall have a maximum external height of

2070mm (81.5”) to allow passage through a standard 7ft. (84”) doorway without

tipping.

4. Rack enclosure shall support a dynamic load (rolling on castors) of 909kG (2000

lbs.) total weight.

5. Rack enclosure shall also be designed and manufactured to be matching in both

color and construction to the UPS, PDU/System bypass and extended runtime

battery enclosures to provide a uniform and consistent appearance in a datacenter

environment.

C. Equipment Access and Mounting

1. The enclosure shall provide [25U] [42U] [47U] of equipment vertical mounting

space.

2. The vertical mounting rails shall be adjustable to allow different mounting

depths.

3. Front and rear doors of the enclosure shall be designed with quick release hinges

allowing for easy detachment without the use of tools.

3.9 FLOOR ANCHOR BRACKETS

Floor Anchor brackets shall be available to solidly connect UPS, PDU/System Bypass,

and Battery Enclosure to minimize unintended moving of the equipment.

3.10 SEISMIC FLOOR STANDS