Datasheet

2-1
Chapter 2
Installation
This chapter contains the following sections:
•
Removing the Battery Pack
•
Placing the Unit
•
Inserting and Connecting the Battery
•
Powering On and Connecting Equipment
•
Performing the System Test
•
Status and Informational Screens
•
Connecting the Components
•
Setting Up the J10 or J15 Using the Front-Panel Controls
Removing the Battery Pack
1. Remove the battery retaining bar.
2. Pull the battery straight back.
CAUTION : Weight distribution within battery pack is uneven. Use both hands to
remove battery.
3. Push in the retaining tabs to allow the battery to come out completely.
Placing the Unit
Proper placement of the J10 or J15 should be accomplished in accordance with the
following:
Warning: The J10 and J15 weigh approximately 50 pounds each. Two-person lift is
recommended. To ease placement, it is recommended that the battery pack be