Datasheet

2-15
LOW Sensitivity — should be used when the UPS frequently goes to battery (even
though the utility voltage appears normal).
Figure 20. SENSITIVITY (MEDIUM) Setting Screen
DISPLAY DIMMER Setting — lets you set a brightness level for the LCD of
HIGH, LOW, or OFF. Use the SETUP push button to advance to the Display
Dimmer screen (Figure 21). Once the display is shown, repeatedly pressing the Up
or Down Arrow push button allows you to set the brightness of the display. Once the
Display brightness is at the desired value, press the SETUP push button to store that
setting.
Figure 21. DISPLAY DIMMER (HIGH) Setting Screen
LED DIMMER Setting — lets you set a brightness level for the front-panel light
emitting diode (LED) indicators of HIGH, LOW, or OFF. Use the SETUP push
button to advance to the LED DIMMER screen (not shown). Once the display is
shown, pressing the Up/Down Arrow push button allows you to set the brightness of
the LEDs.