Owners manual

93KVM Access Management Software User Manual
Adding Firmware Files.
1. Click Add to open the Add Firmware File page.
2. Browse to the location where the downloaded files are stored and select the file.
3. Provide a description for the file.
4. Click Save to complete the procedure and add the firmware file to the list.
Note: If the firmware file isn't KVM ACCESS compliant (even though it is compliant
for the device in a stand-alone configuration), KVM ACCESS will not let you load it.
Deleting Firmware Files.
1. Select Firmware in the Sidebar.
2. In the Interactive Display panel, put a check in front of the file to be removed from the list.
Note: Remove more than one file by checking as many items as required. Remove all
the files by checking the box at the top of the column.
3. After selection are complete, click Delete at the top-right of the panel.
4. Click OK in the confirmation popup.
Configuration Files
Deleting Configuration Files.
Click Configuration in the Sidebar to open the Configuration Files page. This page lists the backup
configurations for the server made with the Backup device configuration/account information task ( and
allows you to delete the files you no longer wish to keep.
1. Put a check in front of the configuration to be deleted.
2. Click Delete (at the top-right of the panel).