Owners manual

119KVM Access Management Software User Manual
The KVM ACCESS Administrator gets this information to use in the Adding an External Authentication
Server procedure (see “LDAP” on page 46). In this example, the fields would be filled in as follows:
– IP: 192.168.10.100
– Port: 389
– BaseDN: dc=apc,dc=com
– UserRDN: ou=software
– Key attribute: cn
– Object class: person
– Full name attribute: sn
After the LDAP Authentication server has been added, the KVM ACCESS Administrator can use the
Browse button to browse all the user names in the software directory.
Active Directory Settings Example
In this example the external server is Active Directory on Windows Server 2003 system. Its IP address is
192.168.10.100. Configure Active Directory in Windows Server 2003 as follows:
1. Open Start > Control Panel > Administrative Tools > Active Directory Users and
Computers > Domain > Users.
2. The KVM ACCESS Administrator gets this information to use in the Adding an External
Authentication Server procedure (see Active Directory, page 46).
In this example, the fields are filled in as follows:
– IP: 192.168.10.100
– UserRDN: cn=users
After the Active Directory Authentication server has been added, the KVM ACCESS Administrator can
use the Browse button to browse all the user names in the Users directory.