Owners manual

KVM Access Management Software User Manual8
8. Fill in the fields in the Config & Setup dialog box, according to the information in the table.
9. After the fields have been filled, click Next to continue.
Note: Any of these settings can be changed following the installation. See“Server
Information” on page 74, for details.
10.The dialog box informs you that files are being copied to the installation folder. Once the files
have been copied, click the Continue button.
Heading Description
Server name The default name for the server - as defined in the Windows Computer Name
setting. You can choose a different name to identify the server on the KVM ACCESS
installation. The name can be from 2-32 bytes in any supported lantuage.
Note: 1. The following characters may not be used: “ ‘ \
2. The name is only for KVM ACCESS server purposes - it doesn’t change the actual
computer name.
Viewer port The port that the user uses to communicate with KVM ACCESS servers.
The default is 8003.
Note: 1. This is the Viewer Port referred to on the This Server web page. See
.“Server Information” on page 74.
2. Each KVM ACCESS server on the system can use its own port setting, for ease of
management it is recommended that all servers use the same port setting.
Device port The port that the KVM ACCESS server uses to communicate with the devices on the
installation. The default is 8000.
Each KVM ACCESSKVM ACCESS server can have a separate device port number,
but in order to communicate with the devices connected on its network segment,
those devices must be configured to use the same port as the one set here.
HTTP port The port that the KVM ACCESS server uses for web communication. The default is
80. If you use a different port, users must specify the port number in the URL of their
browsers.
HTTPS port The port that the KVM ACCESS server uses for secure web communication. The
default is 443. If you use a different port, users must specify the port number in the
URL of their browsers.